By line of business

Property · dwelling coverage

A homeowners coverage calculator that starts from what it costs to rebuild

The homeowner enters square footage, a local rebuild cost and their current dwelling limit, and sees the recommended Coverage A, the related limits and their insurance-to-value. You receive the shortfall, if any, before the renewal conversation.

The homeowners coverage calculator estimates the dwelling coverage needed to rebuild a home from its square footage and local rebuild cost, adds a cushion for cost increases, and sets other structures, personal property, loss of use and ordinance or law limits as percentages. Agencies embed it to start coverage reviews with the homeowner's own estimate of their insurance-to-value.

Included on every plan, including the free Producer plan.

LiveLive calculatorEstimates of coverage need, never quotes or offers of insurance.

This is the real widget your visitors use. On this site its lead form is switched off.

New lead · pre-qualified

What the inputs tell you before the call

InputsWhat it tells your producer
Current Dwelling Limit (Coverage A)Read from their declarations page, it shows they have a policy in hand. Compared with the recommended Coverage A, it gives you their insurance-to-value before you ask a single question; zero means they are shopping for a new policy.
Local Rebuild Cost per sq ftWhere their figure came from matters. A builder's or insurer's estimate is a solid basis; a figure that looks like a market price per square foot suggests they are confusing market value with rebuild cost.
Finished Living Area (sq ft)The size of the home and a quick check against what your carrier's replacement cost tool will need. Ask whether finished basements or attached garages are included.
Cushion for Cost Increases (%)How worried they are about post-disaster price surges. A high cushion is an opening to explain extended or guaranteed replacement cost endorsements, where available.
Ordinance or Law (% of A)Whether they know older homes may need code upgrades when rebuilt. A raised percentage on an older home is a sign of a well-informed prospect.
Personal Property (% of A)Whether they think the default contents limit is enough. A higher figure often means valuables that may need scheduling.

Your first call

How should a producer open a coverage review after the homeowners estimate?

Treat the calculator's figure as the homeowner's own starting estimate, not a replacement cost appraisal. The next step is your carrier's replacement cost estimator, built from construction details the calculator does not collect.

  1. 01Your estimate put your current dwelling limit at about 78% of the rebuild cost you calculated. Before we look at anything else, can we run the house through our carrier's replacement cost tool to check that figure?
  2. 02You added a sizeable cushion for cost increases. Some policies offer extended replacement cost for exactly that concern. Would you like to see whether yours has it?
  3. 03You raised your personal property limit above the default. Are there items like jewelry or collections that might need to be listed separately?

Where to place it on your site

  • Homeowners insurance product page

    Shoppers who start with coverage rather than price arrive with a dwelling figure and a declarations page to discuss.

  • Pre-renewal email to existing clients

    A link to check their dwelling limit before renewal surfaces underinsurance while there is still time to fix it.

  • Article after a regional storm or wildfire

    Neighbors of affected homes start asking whether their own coverage would rebuild. The calculator gives them a concrete answer to bring to you.

Why does the calculator use rebuild cost instead of market value?

Because dwelling coverage pays to rebuild the house, not to buy it again. Market value includes the land, which is not destroyed, and reflects local demand rather than construction costs. A home can sell for far more or far less than it costs to rebuild, so the calculator works only from square footage and rebuild cost.

The field guidance tells homeowners not to use market value and to take their per-square-foot figure from their insurer's replacement cost estimate or a local builder. That message, repeated at the moment they are thinking about it, does a lot of your client education for you.

The estimate remains a simple square-foot calculation. Construction type, finishes, local labor and materials can change the true figure significantly, which is why the follow-up is a proper replacement cost estimate.

What does insurance-to-value tell the agency?

It is the current dwelling limit divided by the recommended coverage, and it is the single most useful number in the lead. Many homeowners policies pay full replacement cost on a partial loss only if the limit is at least 80% of replacement cost; below that, the insurer may pay less.

A lead showing insurance-to-value well below 100% is a coverage-review conversation that protects the client and, if a loss occurs, the agency's relationship with them. Document the recommendation and the client's decision.

The calculator also shows the shortfall against the current limit in dollars, which makes the conversation concrete. If the client chooses not to increase the limit, keep a record of that choice.

  • Recommended dwelling coverage (A) and base rebuild cost
  • Other structures (B), personal property (C) and loss of use (D) at the percentages entered
  • Ordinance or law coverage
  • Shortfall against the current limit and current insurance-to-value

Which P&C agencies get the most from a homeowners coverage calculator?

Personal lines agencies running annual reviews, agencies in regions where rebuilding costs have climbed or where wildfires and storms have exposed underinsurance, and any agency that wants new-business leads to arrive with a dec page in hand. The calculator tends to attract homeowners already holding their policy and wondering about it.

Send the direct link to existing clients a few weeks before renewal. Their submission updates their contact record, so your service team sees the homeowner's own estimate alongside the policy.

For new business, place the calculator on your homeowners page and connect the webhook to your CRM or HighLevel, so a lead with a low insurance-to-value can be routed to a producer quickly.

Homeowners Insurance Coverage Calculator

Terms the widget explains

Dwelling coverage (Coverage A)
The part of a homeowners policy that pays to repair or rebuild the house itself and attached structures. It should equal what it would cost to rebuild, not what the home would sell for, because the land is not destroyed and market prices can be higher or lower than construction costs.
Replacement cost
The cost to rebuild the home with materials of like kind and quality at today's prices, without deducting for depreciation. Insurers estimate it from square footage, construction type, finishes and local labor costs. This calculator uses a simpler square-foot estimate.
Insurance-to-value and the 80% rule
Many homeowners policies only pay full replacement cost on a partial loss if the dwelling limit is at least 80% of the home's replacement cost. Below that, the insurer may pay a reduced amount. Insurance-to-value is your current limit divided by the recommended coverage.
Other structures (Coverage B)
Coverage for structures not attached to the house, such as a detached garage, shed, fence or guest house. It is usually set at 10% of Coverage A and can be raised if you have valuable outbuildings.
Personal property (Coverage C)
Coverage for furniture, clothing, electronics and other belongings. Policies pay either actual cash value or, with a replacement cost endorsement, the cost to buy new. Jewelry, firearms and collectibles have low theft limits unless scheduled separately.
Loss of use (Coverage D)
Pays additional living expenses — hotel or rent, extra food and travel costs — while your home cannot be lived in after a covered loss. Rebuilding after a major loss can take a year or more.
Ordinance or law coverage
Pays the extra cost of bringing a rebuilt home up to current building codes, such as new electrical, energy or wind standards, and of demolishing undamaged parts when the law requires it. Older homes often need more of this coverage.
Extended replacement cost
An endorsement that pays a set percentage above the dwelling limit, often 20% to 50%, if rebuilding costs more than expected — for example when labor and materials surge after a regional disaster. The cushion in this calculator plays a similar role.

What to offer next

Compliance notes for this line

  • The estimate is not a replacement cost appraisal and does not set a premium. Set dwelling limits with your carrier's replacement cost estimator and document the client's decision.
  • Some states, including California, regulate replacement cost estimates given to applicants and who may provide them. Follow your state's rules before quoting a rebuild figure.
  • Do not describe the Coverage B, C and D percentages as the client's actual policy terms; they are common defaults and policies differ.
  • If you call or text people who submit the calculator, your consent language must cover that contact under the TCPA. This is not legal advice.

InsuranceQuoteWidget is software. It is not an insurance agency or producer and does not quote, sell or bind insurance. Insurance licensing and marketing rules vary by state.

How to word consent for calls and texts

FAQ

Questions agencies ask

Answers first, details after.

Does the homeowners coverage calculator use market value?

No. It uses square footage times a local rebuild cost per square foot, plus a cushion for cost increases. The guidance tells visitors not to use market value, which includes land and reflects demand rather than construction costs.

Is the result a replacement cost estimate my carrier will accept?

No. It is a simple square-foot estimate to start the conversation. Carriers set dwelling limits using their own replacement cost tools, which account for construction type, finishes and local labor. Use the calculator's figure to identify homes that need that review.

What is insurance-to-value in the results?

The current Coverage A limit divided by the recommended dwelling coverage. The definitions explain that many policies pay full replacement cost on partial losses only when the limit is at least 80% of replacement cost, so a low figure is a reason to review.

Why do Coverage B, C and D appear as percentages?

Because homeowners policies commonly set them as a percentage of Coverage A: 10% for other structures, 50% for personal property and 20% for loss of use are typical defaults on HO-3 policies. Visitors can change each percentage to match their own policy.

What is the cushion for cost increases?

An extra percentage on top of the rebuild cost for construction inflation and price surges after a widespread disaster. Extended replacement cost endorsements serve a similar purpose, which makes a high cushion a good opening to discuss them.

Does the calculator include ordinance or law coverage?

Yes. The visitor sets it as a percentage of Coverage A, often 10% by default. The definitions explain that older homes may need more, because rebuilding to current codes can add significant cost.

Can I send the calculator to existing clients before renewal?

Yes. Send the direct link by email; when the client submits, the lead is appended to their existing contact record by email or phone, so your team sees their estimate alongside earlier notes. Make sure your consent language covers how you follow up.

Does the lead show the shortfall in dollars?

Yes. Every result is stored with the lead and included in the email alert and webhook, including recommended Coverage A, the shortfall against the current limit and insurance-to-value, so a CRM workflow can route underinsured homeowners first.

Which plan includes the homeowners coverage calculator?

Every plan includes the insurance calculators, this one too, starting with the free Producer plan, which embeds up to 5 calculators. Agency at $150 a month raises that to 50 and adds webhooks, with a 14-day free trial on monthly and yearly billing.

InsuranceQuoteWidget

Put the Homeowners Insurance Coverage Calculator on your site.

Included on every plan, starting with the free Producer plan. Paid plans add webhooks and a 14-day free trial.

Start freeCompare plans

Free Producer plan · 14-day trial on paid plans · cancel any time